RUSART Deco: Crackle Sizing For Water-Based Paints

Crackle Sizing For Water-Based Paints is a sizing material used as the base for a crackle finish. Apply to a clean and dry surface only in an even single coat. If the surface is glossy, please sand it. For a better adhesion, apply over a low absorbent base coat. Wait for 1- 4 hours before applying another layer of the sizing. After drying, this paste will create crackled surface that can be painted. This product needs glazing finish or sealant for better performance.

The more coats you apply the more cracking effect.

For water-based paints only. For latex paints, please use RUSART Deco: Cracking Varnish For Latex Paints.
Soft brush or foam roller suggested.

Clean your skin and equipment immediately after use with soap and warm water. 

Ingredients: 100% acrylic waterborne formulation.

Store at room temperature.

VOC<100 g/l